- Home
- Equipment
Refine by
Dave Koenig Xprt Equipment & Supplies
13 equipment items found
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Disks: 22', 24', 26' disks. Frame: The heavy duty frame is 5x5x1/2 rectangular tubing. Arbor Bolt: 1-1/2' square Hitch: Combination three point hitch has category two and three. Spools: Spools are cast metal. Bearings: Heavy duty bearings and bearing ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Disks: 28', 26', 24' disks are standard, 26', 24', 22' disks and notch disk are available. Frame: The heavy duty frame is 5 x 7 x ½ rectangular tubing. Arbor Bolt: 1-1/2' square. Hitch: Combination three point hitch has category two and three. Spools: Spools are cast ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Frames: All frames are constructed with 6" x 10" x ?" structural steel rectangular tubing and are angled to provide maximum soil action with a minimum of draft load. Shanks: Specially curved shanks are mounted to the rear of the frame to maximize ripping depth and assist in alleviating trash build up. The 1 ¼" wide shanks are available with either 33" or 37" clearances between the bottom ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Frames: All frames are constructed with 8" x 12" x 1/2" structural steel rectangular tubing and are angled to provide maximum soil action with a minimum of draft load. Shanks: Specially curved shanks are mounted to the rear of the frame to maximize ripping depth and assist in alleviating trash build up. The 2" wide shanks are available with either 37" or 41" clearances between the bottom of the ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Bushings: Hardened bushings at pivot points. Transport Wheels: Heavy Duty 6-bolt AG hubs and axles. Hydraulic Cylinder: Single 4" X 8" cylinder with cross tubes, 2 ¼" rod diameter. Tires: 11.5L X 15, 8-ply ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Finishing rippers are used in plowed fields to level and break clods. Being able to enter fields before moisture is lost helps in breaking the clods. Compaction is eliminated due to the ripper shanks breaking up the soil level for the rollers. The rollers gauge the depth of the shanks and the shanks put down pressure on the rollers to help break up clods.finishing ripper. Finishing rippers ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Frames All models are made with extra heavy-duty frames constructed of 5' x 7' x ½' rectangular structural steel tubing. Steel Rings Rings are welded construction and hard faced between rings to eliminate wear. The floating ring design works excellent on contours between rings and uneven ground. Specially mounted teeth are designed to take on the heaviest ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Row Spacings: Multiple Spacings are available to meet all farm requirements. Disk Gangs: Heavy Duty spools, 1 ½" gang bolt, 4 bolt flange bearings, 24" notched ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Frames: All frames are constructed with 5" x 7" x ½" structural steel rectangular tubing and are angled to provide maximum soil action with a minimum of draft load. Shanks: Specially curved shanks are mounted to the rear of the frame to maximize ripping depth and assist in alleviating trash build up. The 1 ¼" wide shanks are available with either 26" or 29" clearances between the ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Frames: All frames are constructed with 6" x 10" x 1/2" structural steel rectangular tubing and are angled to provide maximum soil action with a minimum of draft load. Shanks: Specially curved shanks are mounted to the rear of the frame to maximize ripping depth and assist in alleviating trash build up. The 1 1/2" wide shanks are available with either 33" or 37" clearances between the bottom of ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Frame:: All models are made with extra heavy duty frames constructed of 6 x 10 x ½ inch structural steel tubing. Each model is angled for maximum soil action with a minimum draft load. Hitch: The hitch is made of 6 x 6 x ½" steel tubing. Shanks: The shanks are of a special curved design mounted on the rear of the frame to give maximum depth and aide in alleviating trash build ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Ring Rollers also known as packers, mulchers, or clod busters are one of the oldest and most versatile tillage tools on the farm today. Pulling a ring roller will insure better seed soil contact and improve seed germination. In doing so you will help moisture stay in the soil, instead of evaporating out due to air pockets left behind in the fields full of clods. The result is a more uniform ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Steel rings last longer in rocky or heavy clod conditions; thus, cutting downtime and costly ring replacement. The 16/24 rings are all welded construction and are hard-faced between rings to eliminate wear. The floating ring design works excellent on seed beds and for level and uneven ground. Other ring sizes are available. Hydraulic gauge wheels for easy transport. Tire sizes are 14L-16.1 ...